Brass Pipe & Hose Fittings Manufacturer – Precision Cast & CNC Machined
Precision machined pipe and hose fittings in brass and bronze – flare fittings, compression fittings, hose barbs, tank connectors, flanges and adapters – with full thread-standard coverage from Metric to Whitworth.
Request a Quote
Amarex is a brass pipe fittings manufacturer and exporter from India, producing leak-proof machined fittings for industrial, marine and fluid-handling applications. We make flare fittings, compression fittings, hose barbs, tank connectors, flanges, adapters, reducers and couplings in brass and bronze – many cast in-house (with forging available for brass), then CNC machined with Metric, UN, BSPT, BSPP or Whitworth threads.
Pipe Fittings
Precision Machined Pipe & Hose Fittings We Manufacture
Our fittings begin as castings or brass forgings and are CNC machined to accurate dimensions and leak-proof performance. Thread compatibility spans international standards and customer-specific requirements.
Each fitting is CNC machined to customer drawings or standard patterns, verified with calibrated thread gauges.
| Fitting | Materials | Typical use |
|---|---|---|
| Brass flare fittings | Brass | Flared-tube connections in fluid and gas lines |
| Brass compression fittings | Brass | Tube connections without flaring - plumbing and pneumatics |
| Brass hose barb fittings | Brass | Hose-to-pipe connections in fluid systems |
| Tank connectors | Brass, bronze | Tank inlet/outlet penetrations |
| Flanges & adapters | Brass, bronze | Line connections and transitions |
| Reducers & couplings | Brass, bronze | Diameter changes and line joins |
| BSP pipe fittings | Brass | BSPT/BSPP threaded pipe connections |
| Custom connectors | Brass, bronze, special alloys (machined) | OEM-specific fluid-handling parts |
Each fitting is CNC machined to customer drawings or standard patterns, verified with calibrated thread gauges.
How We Manufacture Pipe & Hose Fittings
Fittings live or die on thread quality and sealing face finish.
We machine most fittings directly from free-machining brass bar on CNC turning centres, and cast the larger bodies in our sand casting and shell moulding lines before machining. Threads are cut and gauged to the standard you specify, not to a generic profile.
Sealing faces and thread flanks are held to +/-0.01 mm (10 microns), which is what keeps a compression or flare fitting sealing across repeated assembly cycles.
Grade selection
free-machining brass for threaded work, bronze where strength or seawater duty applies.
Blank preparation
CNC turned from bar, or sand cast / shell moulded for larger bodies.
CNC machining
Turning, drilling and thread cutting to BSPT, BSPP, metric, UN or Whitworth.
Thread verification
Go/no-go gauging on every thread form we cut.
Finishing
Deburring, polishing and any specified plating, which is in our scope.
Inspection
Calibrated dimensional check and leak verification where specified.
Pipe Fitting Manufacturing Process
A fitting is bought for its thread. Every thread form we cut is checked on go/no-go gauges, and larger bodies are cast to near-net shape so machining is spent only on the faces that seal.
Free-machining brass for threaded work, bronze for strength and seawater duty
CNC turned from bar, or sand cast and shell moulded for larger bodies
BSPT, BSPP, metric, UN and Whitworth threads cut and go/no-go gauged
Calibrated dimensional check and leak verification where specified
Why Choose Machined Brass Pipe Fittings
Brass remains the default for fluid and gas fittings because it machines cleanly at the thread, seals reliably against metal and elastomer, and resists the corrosion found in water and pneumatic service.
Machined fittings also let you specify a thread standard and port geometry that an off-the-shelf catalogue part will not match.
Thread standards to your drawing - BSPT, BSPP, metric, UN and Whitworth, gauged in process.
Clean sealing geometry - flare and compression faces machined, not formed, for repeatable sealing.
Corrosion behaviour matched to media - brass for general service, bronze for seawater duty.
Dezincification-resistant grades available where water regulations require them.
Custom ports and adapters - one-off geometries produced to 2D/3D drawings without tooling cost.
Independent proof - third-party test reports from Government-approved NABL laboratories on request.
Industries We Supply Pipe & Hose Fittings To
Industrial fluid
CNC machined brass compression and flare fittings
Plumbing & water systems
Cast and machined tank connectors and BSP pipe fittings
Marine onboard fluid lines
Cast and machined bronze reducers, couplings and adapters
Pneumatic & gas connections
CNC machined brass hose barb fittings and adapters
OEM & distributor programmes
CNC machined custom connectors to drawing
CNC Machining Capabilities for Pipe Fittings
- Processes
Casting + brass forging + CNC turning, threading, drilling
- Threads
Metric, UN-series, BSPT, BSPP, Whitworth/BS series
- Inspection
Calibrated thread gauges, dimensional inspection
- Materials
Brass, bronze/gunmetal
- Custom work
Standard patterns or customer-specific designs
- Quality
ISO-certified systems, material traceability
- Order type
OEM and distributor supply; export worldwide
Quality Assurance
As an ISO 9001:2015 certified and modern CNC machine shop in India, we uphold global benchmarks while delivering cost-effective precision machining solutions. With RoHS & REACH compliance, we are a trusted machining partner for OEMs worldwide.
Why Amarex for Machined Brass Pipe Fittings
Amarex is an Indian manufacturer and exporter of precision CNC-machined components, castings and forgings, with plants in Mumbai and Jamnagar – the centre of India’s brass fittings industry. Casting, forging and machining under one roof delivers leak-proof fittings at export scale with full documentation.
- Casting + brass forging + CNC machining in-house
- Full thread-standard coverage incl. BSPT, BSPP and Whitworth
- Jamnagar brass ecosystem - competitive, reliable material supply
- Trusted supplier to OEMs and distributors worldwide
Meet the Team Behind Pipe Fittings
Aryan Jain CEO
Frequently Asked Questions
We machine brass flare fittings, compression fittings, hose barbs, tank connectors, flanges, adapters, reducers, couplings and custom connectors in brass and bronze.
Yes. We produce brass flare and flare pipe fittings to standard patterns or customer drawings, machined from castings or forgings and verified with calibrated thread gauges.
Metric, UN-series, BSPT (taper), BSPP (parallel) and Whitworth/British Standard threads, ensuring compatibility with international standards.
Both. Many fittings begin as castings; pressure-critical brass fittings can be forged, then CNC machined for accurate dimensions and leak-proof performance.
Yes. Tank connectors, reducers and couplings in brass and bronze are core products, machined for leak-proof sealing.
Yes. We supply pipe and hose fittings to OEMs and distributors worldwide with ISO-certified processes and full batch documentation.
Get a quote for pipe & hose fittings
Send us your fitting specifications, thread standards or drawings and our engineering team will respond with options and pricing.