Precision Machined Fire Safety Parts Manufacturer & Exporter
Precision machined fire safety components in brass and bronze – hydrant components, sprinkler parts, strainers, nozzles, tank connectors and adapters – engineered for leak-proof, pressure-resistant operation in critical systems.
Request a Quote
Amarex is a fire safety parts manufacturer from India, producing precision machined components for fire suppression and hydrant systems. We machine strainers, sprinkler components, tank connectors, nozzles, hydrant components, adapters and custom fittings from brass and bronze castings and brass forgings – engineered for leak-proof, pressure-resistant operation to international safety and pressure standards.
Fire Safety Parts by Amarex
Precision Machined Fire System Components We Manufacture
Fire suppression components must work first time, every time, under pressure. Each part is machined from brass or bronze castings or brass forgings for dimensional accuracy, corrosion resistance and high strength.
Scope note for client review: finished couplings, branch pipes and landing valves are NOT listed – confirm final product scop.
| Component | Materials | Typical applications |
|---|---|---|
| Hydrant components | Brass, bronze, gunmetal | Hydrant system internals and fittings |
| Sprinkler components | Brass | Sprinkler system machined parts |
| Strainers | Brass, bronze | Debris filtration in fire lines |
| Nozzles | Brass | Discharge components machined to spec |
| Tank connectors | Brass, bronze | Water tank inlet/outlet connections |
| Adapters & custom fittings | Brass, bronze | System transitions to customer drawings |
Fire Safety Materials & Grades
Brass and bronze dominate fire-system components for corrosion resistance and pressure integrity – a stuck or corroded part is not an option in fire service.
How We Manufacture Fire Safety Components
Fire suppression components must work first time after years of sitting idle, so the process is built around corrosion behaviour and flow accuracy. Hydrant and tank components start as brass or bronze castings from our sand casting and shell moulding lines; nozzles, sprinkler parts and strainer internals are CNC turned from brass bar.
Discharge geometry on nozzles and seat faces on hydrant internals are held to +/-0.01 mm (10 microns), because flow rate and seal integrity both follow directly from those dimensions.
Material selection
Brass, bronze or gunmetal chosen for long-term water-service corrosion resistance.
Casting or bar preparation
Sand cast and shell moulded bodies, or bar stock for turned parts.
CNC machining
Turning, milling and thread cutting on seats, ports and connections.
Finishing
Deburring and any specified surface treatment, which is in our scope.
Flow and leak verification
Pressure testing to your specification where required.
Final inspection
Calibrated dimensional check and material verification before dispatch.
Fire Safety Part Manufacturing Process
Fire safety parts sit unused for years and must work on the day they are needed. Bodies are cast in corrosion-resistant alloys, machined on seat and port faces, and pressure tested to your specification where required.
Brass, bronze and gunmetal chosen for long-term water-service corrosion resistance
Bodies sand cast or shell moulded, turned parts machined from bar stock
Seats, ports and connections CNC machined and thread cut
Pressure tested where specified, then dimensionally inspected before dispatch
Why Choose Machined Brass & Bronze Fire System Parts
Fire components are dormant assets that must perform on the day they are needed. Brass and bronze are specified for these systems because they resist the scale, stagnation and galvanic attack that build up in charged water lines over years of standby service.
Corrosion resistance in standing water
Brass, bronze and gunmetal suited to charged lines.
Flow accuracy
Nozzle and seat geometry machined to +/-0.01 mm (10 microns).
Pressure integrity
Hydrostatic and pneumatic testing available before dispatch.
Made to your approval drawings
Critical where systems are certified as an assembly.
Material traceability
Test certificates with every batch, and third-party NABL reports on request.
Consistent supply
Brass casting and machining run in the same facility at Jamnagar.
Industries We Supply Fire Safety Parts To
Fire hydrant systems
cast and machined hydrant internals and tank connectors
Sprinkler & suppression systems
sprinkler machined parts and nozzles
Fire-line water supply
cast and machined brass and bronze strainer bodies and caps
Building fire protection
CNC machined adapters and custom fittings to drawing
Fire equipment OEM assemblies
custom machined brass and bronze parts
CNC Machining Capabilities for Fire Safety Parts
- Processes
Casting (brass/bronze) + brass forging + CNC turning, threading, drilling
- Machining focus
Pressure-tight threads and sealing faces
- Materials
Brass, bronze, gunmetal
- Custom work
Made to customer 2D/3D drawings and standards
- Quality
ISO-certified systems, calibrated inspection, traceability
- Order type
OEM / custom; export worldwide
Quality Assurance
As an ISO 9001:2015 certified and modern CNC machine shop in India, we uphold global benchmarks while delivering cost-effective precision machining solutions. With RoHS & REACH compliance, we are a trusted machining partner for OEMs worldwide.
Why Amarex for Machined Fire Safety Components
Amarex is an Indian manufacturer and exporter of precision CNC-machined components, castings and forgings, with locations in Mumbai and Jamnagar. Proven expertise in brass and bronze castings and brass forgings lets us deliver the pressure-resistant, leak-proof machined parts fire systems demand – with the documentation to prove it.
- Casting + forging + machining under one roof for pressure parts
- Brass and bronze fire-service alloy expertise
- Leak-proof, pressure-resistant machining discipline
- ISO 9001:2015 certified quality management, with batch documentation
Meet the Team Behind Fire Safety Parts
Aryna Jain CEO
Frequently Asked Questions
We machine strainers, sprinkler components, tank connectors, nozzles, hydrant components, adapters and custom fittings for fire suppression and hydrant systems.
Brass and bronze – machined from castings and brass forgings – for corrosion resistance, high strength and pressure-tight operation.
Yes. Components are engineered for leak-proof and pressure-resistant operation, machined to international safety and pressure standards with calibrated inspection.
Yes. As a hydrant fittings manufacturer in India we produce machined hydrant components and system fittings to customer drawings and applicable standards.
Yes. We machine custom adapters and fittings to your 2D/3D drawings, with material test certificates and inspection reports per batch.
Get a quote for fire safety parts
Send us your drawings or specifications and our engineering team will respond with materials, standards compliance and pricing.