CNC Turning Services in India for Custom Turned Components

Made-to-drawing CNC turned components manufactured in Jamnagar, India. Share the drawing, material, critical features and inspection requirements for a project-specific turning review.

CNC Turning Services in India for Custom Turned Components
  • ISO 9001:2015 certified quality management
  • Material test certificates
  • Third-party NABL test reports
  • Exporting worldwide

Amarex provides CNC turning services from India for rotational components made to released customer drawings. We turn brass, aluminum, steel and engineering plastics into shafts, bushes, sleeves, pins and threaded parts, with the process route and inspection records agreed for each part before quotation.

Custom CNC Turned Parts Made to Your Drawing

CNC turning suits any component whose functional features are formed about an axis of rotation. Amarex turns bushes, sleeves, spacers, shafts, pins, collars, threaded inserts, fasteners and connector bodies against your released drawing, model or approved sample. Every enquiry is reviewed by an engineer before a price is issued, so the turning route you are quoted reflects the part rather than a catalogue assumption.

Turning is one of two lead in-house capabilities at our Jamnagar location, alongside CNC milling. Where a component carries both turned and non-rotational features, we review the complete route against the drawing and plan each operation on the machine that suits it.

Product range: bushes and sleeves; shafts and pins; spacers and collars; threaded inserts and fasteners; connector and terminal bodies; stepped and profiled turned components.

Turning drawing inputs we need

Send the current drawing revision, material, diameter and bore requirements, thread callouts, groove and undercut detail, critical features, surface-finish requirement and the inspection records you need. Where the drawing, model and purchase specification disagree, we raise a technical query before production rather than choosing an interpretation ourselves.

Materials we turn

Brass and copper alloys, aluminum led by 6061-T6, stainless steel, carbon and alloy steel, engineering plastics, Monel 400 and proven Inconel grades are reviewed against the drawing. Free-machining brass remains the highest-volume material through our turning section, which is why brass turned components carry our deepest process experience.

Custom Turned Components
Turned component Typical materials Drawing features reviewed
Bushes & sleeves Brass, bronze, stainless steel, engineering plastics Bore, outside diameter, length, shoulders and fit
Shafts & pins Stainless steel, carbon or alloy steel, brass Datums, diameters, cross-holes, threads and mating features
Spacers & collars Brass, aluminum, stainless steel, engineering plastics Thickness, concentricity, chamfers and bore fit
Threaded inserts Brass, stainless steel, aluminum Thread form, engagement length, hex or knurl features
Fasteners & studs Brass, stainless steel, carbon steel Thread class, head form, shank diameter and length
Connector bodies Brass, aluminum, stainless steel Bores, sealing diameters, thread forms and hex features
Stepped turned parts Brass, aluminum, stainless steel, engineering plastics Step diameters, concentricity, grooves and transitions

How We Review a CNC Turning Enquiry

Our review captures everything needed to choose a turning route and an inspection plan: drawing revision, material, datum features, critical characteristics, finishing scope, quantity, packing and export documents. Nothing is assumed from a part name or a photograph.

The purpose of the sequence is to move every unknown to the front of the job. A query answered during quotation costs a day; the same query discovered after machining costs a batch.

Drawing and requirement review

Confirm revision, material, quantity, critical dimensions, finish and required documentation.

Material and blank-route review

Confirm bar stock or an assessed near-net blank against the drawing and material.

Turning-feature and tolerance review

Assess diameters, bores, threads, grooves, datums and fits against process capability.

Process-route selection

Confirm the turning route and any secondary milling, drilling or threading operations required.

Inspection-plan agreement

Define the critical characteristics, measuring method and records required for the order.

CNC Turning Process for Custom Components

Turning is selected around the component geometry, starting form and functional features. Brass hot-forged blanks, or sand and shell-moulded blanks, may be assessed where the drawing and material make a near-net route suitable. Functional surfaces are turned last and inspected to the agreed plan, so the features your drawing controls are the features we verify before dispatch.

1

Material and blank approval

2

CNC setup, workholding and datum control

3

Turning of diameters, bores, threads and grooves

4

Deburring, specified finishing and agreed inspection

What to Check in a CNC Turning Supplier

A turning supplier is worth assessing on drawing interpretation, feature and datum review, controlled inspection and clear manufacturing scope. Generic volume, cost or delivery claims tell a buyer very little. The points below are the ones we would want to be held to.

Made to released drawings, models or approved samples

Always to the released drawing.

Feature-level review

Critical diameters, bores, threads and datums assessed against geometry and process capability.

Qualified close-tolerance work

Specified critical dimensions can be held to +/-0.01 mm (10 microns) where geometry and process permit.

Turning and milling are our lead capabilities

The setup plan and inspection points are agreed before production starts.

Agreed inspection and test evidence

Material test certificates, dimensional reports and third-party NABL test reports can be included when specified.

Industries We Supply with CNC Turned Components

Brass valve body with a machined seat face and female threaded ports

Valves & flow control

CNC turned valve stems, bonnet bushes and seat rings

Brass hose barb fitting with a male BSP thread for hose-to-pipe connections

Pipe & hose fittings

CNC turned threaded fittings, adapters and hose barbs

Brass neutral link bar with eight terminal ways and captive screws

Electrical components

CNC turned terminals, connector pins and earthing parts

CNC machined stainless steel stepped automotive shaft

Automotive assemblies

CNC turned pins, shafts, bushes and spacers

Brass cable gland machined with hexagonal wrench flats

Cable glands & accessories

CNC turned gland bodies, locknuts and compression cones

Stainless steel instrument adapter with a hex base, male thread and cross-drilled outlet

Instrumentation & general OEM

CNC turned instrument sleeves, sensor bodies and adapters

CNC Turning Capabilities

  • Processes

    CNC turning with secondary drilling, tapping, threading and laser marking; milled features reviewed against the drawing

  • Components

    Bushes, sleeves, spacers, shafts, pins, collars, threaded inserts, fasteners and connector bodies

  • Materials

    Brass, copper, aluminum (6061-T6 lead grade), stainless steel, carbon and alloy steel, engineering plastics, reviewed special alloys

  • Tolerance

    Specified critical dimensions to +/-0.01 mm (10 microns) where geometry and process permit

  • Blank routes

    Bar stock, or assessed brass hot-forged, sand-cast and shell-moulded near-net blanks

  • Inspection

    Critical dimensions and required records agreed against the released drawing

  • Documentation

    Material test certificates, dimensional inspection reports, third-party NABL test reports on request

  • Custom work

    Made to customer 2D drawings, 3D models or approved samples

Quality Assurance

As an ISO 9001:2015 certified and modern CNC machine shop in India, we uphold global benchmarks while delivering cost-effective precision machining solutions. With RoHS & REACH compliance, we are a trusted machining partner for OEMs worldwide.

ISO 9001:2015, RoHS and REACH certification marks

Why Buyers Choose Amarex for CNC Turning

Amarex Machining is a family-owned Indian manufacturer and exporter of precision machined components. Our team brings over fifteen years of experience across machining, forging and casting routes, and enquiries are assessed by people who have run these processes.

The practical benefit is a supplier who sets out the full turning, machining and finishing route in the quotation, before you commit. That clarity is worth more across a programme than an optimistic first quotation.

  • Engineer-reviewed quotations — drawings assessed for manufacturability before a price is issued
  • Agreed scope — the process route, inspection plan and finish specification are confirmed in writing before turning starts
  • ISO 9001:2015 certified quality management with calibrated inspection and material traceability
  • Export experience serving OEM and distributor buyers, with agreed packing and export documentation
Aryan Jain, Director of Amarex Metals

Meet the Expert Behind Your Turned Components

Aryan Jain Director, Amarex Machining
Your enquiry is reviewed by people who have run these processes. Amarex is led by Aryan Jain, an Industrial Engineer with a B.Tech in Production Engineering, whose experience spans precision machining, casting, forging, pressing, extrusion, assemblies and finished-product testing across metal, plastic and wooden components. Drawings are assessed for manufacturability, material selection and inspection method before we quote, so the process route you receive is the one the part actually needs.

Frequently Asked Questions

Rotational components such as bushes, sleeves, spacers, shafts, pins, collars, threaded inserts and fasteners, or any part with controlled diameters, bores, threads or grooves, can be reviewed against your drawing.

Brass and copper alloys, aluminum led by 6061-T6, stainless steel, carbon and alloy steel, engineering plastics, Monel 400 and proven Inconel grades are reviewed against the drawing. Brass carries our deepest turning experience.

Specified critical dimensions can be held to +/-0.01 mm (10 microns) where component geometry, material and the selected process allow it. Each tolerance is confirmed during drawing review rather than promised in advance.

Yes, where the drawing and material make a near-net route suitable. Brass hot-forged blanks and sand or shell-moulded blanks are assessed case by case, and the quotation states which route is used.

Depending on the quotation, material test certificates, dimensional inspection reports and third-party test reports from Government-approved NABL laboratories can be supplied.

Yes. Amarex operates an ISO 9001:2015 certified quality management system, supported by calibrated inspection equipment, material traceability and third-party NABL test reports.

Yes. Customer-specified finishing can be supplied, and the quotation sets out the finish specification, the standard it is checked against and the inspection records supplied with it.

Yes. CNC turning and CNC milling are both lead capabilities at our Jamnagar location, so components with turned and milled features are reviewed as one route against the drawing.

Send your drawing for a CNC turning review

Send your released drawing or model, material, critical features, quantity, inspection requirements and the documentation you need. Our engineering team will review the turning route and respond with the project-specific quotation inputs.