CNC Machining Supplier in India for Australian OEMs

CNC Machining Supplier in India for Australian OEMs
  • ISO 9001:2015 certified quality management
  • Material test certificates
  • Third-party NABL test reports
  • Exporting worldwide

Custom CNC turned and milled components made in Jamnagar, India, to released customer drawings for Australian OEMs, sourcing teams and industrial distributors.

Amarex manufactures made-to-drawing CNC machined components in Jamnagar, India, for Australian OEMs and distributors. Enquiries start with the released drawing, material, critical dimensions, finish, quantity and inspection requirements, and the manufacturing route is agreed for that specific component rather than assumed from a catalogue.

Custom CNC Machined Components for Australia

Typical work includes turned bushes, sleeves, spacers, shafts, pins, collars and threaded inserts, alongside milled housings, blocks, brackets, manifolds and instrument components. CNC turning and milling are selected around the geometry and critical features of the supplied drawing, and every enquiry is reviewed by an engineer before a price is issued.

Distance makes the review matter even more. With a long freight leg, a requirement discovered after dispatch is expensive to correct, so we settle the unknowns while the drawing is still on the screen.

Product range: turned components; milled components; threaded and insert components; housings and manifolds; instrument and connector parts; custom machined components to drawing.

Component family Typical materials Drawing features reviewed
Bushes & sleeves Brass, bronze, stainless steel, engineering plastics Bore, outside diameter, length, shoulders and fit
Shafts & pins Stainless steel, carbon or alloy steel, brass Datums, diameters, cross-holes, threads and mating features
Spacers & collars Brass, aluminium, stainless steel, engineering plastics Thickness, concentricity, chamfers and bore fit
Threaded inserts Brass, stainless steel, aluminium Thread form, engagement length, hex or knurl features
Blocks & brackets Aluminium, steel, stainless steel, engineering plastics Hole pattern, datums, pockets and mounting faces
Housings & manifolds Aluminium, brass, stainless steel Ports, bores, sealing faces and connection geometry
Instrument components Stainless steel, brass, aluminium, reviewed special alloys Critical diameters, sealing features and inspection requirements

Australian drawing and specification inputs

Where a drawing cites AS/NZS, ISO or customer-specific requirements, include the standard, revision, thread designation, critical features and requested inspection records in the enquiry package. The applicable requirement is reviewed for the individual component against the cited standard.

Materials and grade equivalents

Brass and copper alloys, aluminium led by 6061-T6, stainless steel, carbon and alloy steel, engineering plastics, Monel 400 and proven Inconel grades are reviewed against the drawing. Where a material is called out to an AS or ISO designation, we confirm the equivalent grade in writing before machining.

How We Review an Australia CNC Machining Enquiry

The review records drawing revision, material, datums and critical characteristics, inspection evidence, quantity, finishing scope, packing and export documents. A technical query is raised for any requirement the source package leaves open.

Drawing and requirement review

Confirm revision, material, quantity, critical dimensions, finish and required documentation.

Manufacturability and tolerance review

Assess datums, geometry, thread forms, fits and inspection requirements before quotation.

Process-route selection

Select CNC turning, CNC milling, or an assessed near-net blank route where the drawing and material make one suitable.

Inspection-plan agreement

Define the critical characteristics, measuring method and records required for the order.

Production and controlled finishing

Machine the component, complete any specified finishing and carry out the agreed inspection.

CNC Manufacturing Process for Custom Components

CNC turning and milling are selected around component geometry, starting form and functional features. Brass hot-forged blanks, or sand and shell-moulded blanks, may be assessed where the drawing and material make a near-net route suitable. Final functional surfaces are machined last and inspected to the agreed plan.

1

Material and blank approval

2

CNC setup, workholding and datum control

3

Turning, milling and feature machining

4

Deburring, specified finishing and agreed inspection

What Australian Buyers Should Check in a CNC Supplier

A dependable overseas machining decision rests on drawing interpretation, agreed inspection, clear manufacturing scope and documentary evidence the buyer can check before ordering.

Made to released drawings, models or approved samples

Always to the released drawing.

Part-specific tolerance review

Critical dimensions assessed against component geometry, material and process capability.

Qualified close-tolerance work

Specified critical dimensions can be held to +/-0.01 mm (10 microns) where geometry and process permit.

Clearly defined manufacturing route

CNC machining, brass hot forging, sand casting, shell moulding and laser marking described accurately and separately.

Independent verification

Third-party testing through Government-approved NABL laboratories can be arranged when required.

Industries We Supply with CNC Machined Components

Brass valve body with a machined seat face and female threaded ports

Valves & flow control

CNC machined valve bodies, stems and bonnet bushes

Forged brass tee fittings with machined male and female threads

Pipe & hose fittings

CNC machined threaded fittings, adaptors and inserts

Brass panel terminal connector block with threaded cable ports

Electrical components

CNC machined terminals, connector bodies and earthing parts

CNC machined stainless steel stepped automotive shaft

Automotive assemblies

CNC machined pins, shafts, bushes and spacers

Hollow brass ball lamp holder cup with grub screw hole and brushed finish

Lighting & architectural hardware

CNC machined lamp holders, finials and hardware components

Stainless steel instrument adapter with a hex base, male thread and cross-drilled outlet

Instrumentation & general OEM

CNC machined instrument housings, sensor bodies and manifolds

CNC Machining Capabilities for Custom Components

  • Processes

    CNC turning and CNC milling/VMC, with drilling, threading and laser marking

  • Components

    Sleeves, bushes, spacers, shafts, pins, collars, threaded inserts, blocks, brackets, housings and manifolds

  • Materials

    Brass, copper, aluminium (6061-T6 lead grade), stainless steel, carbon and alloy steel, engineering plastics, reviewed special alloys

  • Grade equivalents

    AS and ISO material callouts confirmed to an equivalent grade in writing before machining

  • Tolerance

    Specified critical dimensions to +/-0.01 mm (10 microns) where geometry and process permit

  • Blank routes

    Bar and plate stock, or assessed brass hot-forged, sand-cast and shell-moulded near-net blanks

  • Inspection

    Critical dimensions and required records agreed against the released drawing

  • Documentation

    Material test certificates, dimensional inspection reports, third-party NABL test reports on request

  • Custom work

    Made to customer 2D drawings, 3D models or approved samples

Quality Assurance

As an ISO 9001:2015 certified and modern CNC machine shop in India, we uphold global benchmarks while delivering cost-effective precision machining solutions. With RoHS & REACH compliance, we are a trusted machining partner for OEMs worldwide.

ISO 9001:2015, RoHS and REACH certification marks

Clear Manufacturing Scope and Export Handoff

Amarex Machining is a family-owned Indian manufacturer and exporter. Our team brings over fifteen years of experience across machining, forging and casting routes, and every enquiry is assessed by people who have run these processes.

For an Australian buyer the practical benefit is a supplier who sets out the full manufacturing and finishing route in the quotation, before you commit.

  • Engineer-reviewed quotations - drawings assessed for manufacturability before a price is issued
  • Agreed scope - the process route, inspection plan and finish specification are confirmed in writing before machining starts
  • ISO 9001:2015 certified quality management with calibrated inspection and material traceability
  • Export experience serving OEM and distributor buyers, with agreed packing and export documentation
Aryan Jain, Director of Amarex Metals

Meet the Expert Behind Your Machined Components

Aryan Jain Director, Amarex Machining
Your enquiry is reviewed by people who have run these processes. Amarex is led by Aryan Jain, an Industrial Engineer with a B.Tech in Production Engineering, whose experience spans precision machining, casting, forging, pressing, extrusion, assemblies and finished-product testing across metal, plastic and wooden components. Drawings are assessed for manufacturability, material selection and inspection method before we quote, so the process route you receive is the one the part actually needs.

Frequently Asked Questions

Yes. Amarex manufactures made-to-drawing turned and milled components in approved materials at its Jamnagar location and exports them to Australian OEMs and distributors.

Yes. Provide the applicable standard, revision, dimensions, thread callouts, material and critical requirements. The drawing is reviewed for the individual component before quotation.

Specified critical dimensions can be held to +/-0.01 mm (10 microns) where component geometry, material and the selected process allow it. Each tolerance is confirmed during drawing review.

Brass and copper alloys, aluminium led by 6061-T6, stainless steel, carbon and alloy steel, engineering plastics, Monel 400 and proven Inconel grades are reviewed against the drawing.

Depending on the quotation, material test certificates, dimensional inspection reports and third-party test reports from Government-approved NABL laboratories can be supplied.

Yes. Amarex operates an ISO 9001:2015 certified quality management system, supported by calibrated inspection equipment, material traceability and third-party NABL test reports.

Yes. Plating, anodising and other customer-specified finishing can be supplied to your specification, stated clearly in the quotation.

Import classification, duties and end-use conformity requirements depend on the component and finished product. Amarex prepares agreed component and export documents; the importer and its advisers confirm the applicable route.

Send your drawing for an Australia machining review

Send the released drawing or model, material, critical features, quantity, inspection requirements and required documentation. Our engineering team will review the manufacturing route and confirm the project-specific quotation inputs.