Amarex provides CNC turning services from India for rotational components made to released customer drawings. We turn brass, aluminum, steel and engineering plastics into shafts, bushes, sleeves, pins and threaded parts, with the process route and inspection records agreed for each part before quotation.
Custom CNC Turned Parts Made to Your Drawing
CNC turning suits any component whose functional features are formed about an axis of rotation. Amarex turns bushes, sleeves, spacers, shafts, pins, collars, threaded inserts, fasteners and connector bodies against your released drawing, model or approved sample. Every enquiry is reviewed by an engineer before a price is issued, so the turning route you are quoted reflects the part rather than a catalogue assumption.
Turning is one of our two lead capabilities at our Jamnagar location, alongside CNC milling. Where a component carries both turned and non-rotational features, we review the complete route against the drawing and plan each operation on the machine that suits it.
Product range: bushes and sleeves; shafts and pins; spacers and collars; threaded inserts and fasteners; connector and terminal bodies; stepped and profiled turned components.
Turning drawing inputs we need
Send the current drawing revision, material, diameter and bore requirements, thread callouts, groove and undercut detail, critical features, surface-finish requirement and the inspection records you need. Where the drawing, model and purchase specification disagree, we raise a technical query before production rather than choosing an interpretation ourselves.
Materials we turn
Brass and copper alloys, aluminum led by 6061-T6, stainless steel, carbon and alloy steel, engineering plastics, Monel 400 and proven Inconel grades are reviewed against the drawing. Free-machining brass remains the highest-volume material through our turning section, which is why brass turned components carry our deepest process experience.
| Custom Turned Components | ||
|---|---|---|
| Turned component | Typical materials | Drawing features reviewed |
| Bushes & sleeves | Brass, bronze, stainless steel, engineering plastics | Bore, outside diameter, length, shoulders and fit |
| Shafts & pins | Stainless steel, carbon or alloy steel, brass | Datums, diameters, cross-holes, threads and mating features |
| Spacers & collars | Brass, aluminum, stainless steel, engineering plastics | Thickness, concentricity, chamfers and bore fit |
| Threaded inserts | Brass, stainless steel, aluminum | Thread form, engagement length, hex or knurl features |
| Fasteners & studs | Brass, stainless steel, carbon steel | Thread class, head form, shank diameter and length |
| Connector bodies | Brass, aluminum, stainless steel | Bores, sealing diameters, thread forms and hex features |
| Stepped turned parts | Brass, aluminum, stainless steel, engineering plastics | Step diameters, concentricity, grooves and transitions |
How We Review a CNC Turning Enquiry
Our review captures everything needed to choose a turning route and an inspection plan: drawing revision, material, datum features, critical characteristics, finishing scope, quantity, packing and export documents. Nothing is assumed from a part name or a photograph.
The purpose of the sequence is to move every unknown to the front of the job. A query answered during quotation costs a day; the same query discovered after machining costs a batch.
Drawing and requirement review
Confirm revision, material, quantity, critical dimensions, finish and required documentation.
Material and blank-route review
Confirm bar stock or an assessed near-net blank against the drawing and material.
Turning-feature and tolerance review
Assess diameters, bores, threads, grooves, datums and fits against process capability.
Process-route selection
Confirm the turning route and any secondary milling, drilling or threading operations required.
Inspection-plan agreement
Define the critical characteristics, measuring method and records required for the order.
CNC Turning Process for Custom Components
Turning is selected around the component geometry, starting form and functional features. Brass hot-forged blanks, or sand and shell-moulded blanks, may be assessed where the drawing and material make a near-net route suitable. Functional surfaces are turned last and inspected to the agreed plan, so the features your drawing controls are the features we verify before dispatch.
Material and blank approval
CNC setup, workholding and datum control
Turning of diameters, bores, threads and grooves
Deburring, specified finishing and agreed inspection
What to Check in a CNC Turning Supplier
A turning supplier is worth assessing on drawing interpretation, feature and datum review, controlled inspection and clear manufacturing scope. Generic volume, cost or delivery claims tell a buyer very little. The points below are the ones we would want to be held to.
Made to released drawings, models or approved samples
Always to the released drawing.
Feature-level review
Critical diameters, bores, threads and datums assessed against geometry and process capability.
Qualified close-tolerance work
Specified critical dimensions can be held to +/-0.01 mm (10 microns) where geometry and process permit.
Turning and milling are our lead capabilities
The setup plan and inspection points are agreed before production starts.
Agreed inspection and test evidence
Material test certificates, dimensional reports and third-party NABL test reports can be included when specified.
Industries We Supply with CNC Turned Components
Valves & flow control
CNC turned valve stems, bonnet bushes and seat rings
Pipe & hose fittings
CNC turned threaded fittings, adapters and hose barbs
Electrical components
CNC turned terminals, connector pins and earthing parts
Automotive assemblies
CNC turned pins, shafts, bushes and spacers
Cable glands & accessories
CNC turned gland bodies, locknuts and compression cones
Instrumentation & general OEM
CNC turned instrument sleeves, sensor bodies and adapters
CNC Turning Capabilities
- Processes
CNC turning with secondary drilling, tapping, threading and laser marking; milled features reviewed against the drawing
- Components
Bushes, sleeves, spacers, shafts, pins, collars, threaded inserts, fasteners and connector bodies
- Materials
Brass, copper, aluminum (6061-T6 lead grade), stainless steel, carbon and alloy steel, engineering plastics, reviewed special alloys
- Tolerance
Specified critical dimensions to +/-0.01 mm (10 microns) where geometry and process permit
- Blank routes
Bar stock, or assessed brass hot-forged, sand-cast and shell-moulded near-net blanks
- Inspection
Critical dimensions and required records agreed against the released drawing
- Documentation
Material test certificates, dimensional inspection reports, third-party NABL test reports on request
- Custom work
Made to customer 2D drawings, 3D models or approved samples
Quality Assurance
As an ISO 9001:2015 certified and modern CNC machine shop in India, we uphold global benchmarks while delivering cost-effective precision machining solutions. With RoHS & REACH compliance, we are a trusted machining partner for OEMs worldwide.
Why Buyers Choose Amarex for CNC Turning
Amarex Machining is a family-owned Indian manufacturer and exporter of precision machined components. Our team brings over fifteen years of experience across machining, forging and casting routes, and enquiries are assessed by people who have run these processes.
The practical benefit is a supplier who sets out the full turning, machining and finishing route in the quotation, before you commit. That clarity is worth more across a programme than an optimistic first quotation.
- Engineer-reviewed quotations — drawings assessed for manufacturability before a price is issued
- Agreed scope — the process route, inspection plan and finish specification are confirmed in writing before turning starts
- ISO 9001:2015 certified quality management with calibrated inspection and material traceability
- Export experience serving OEM and distributor buyers, with agreed packing and export documentation
Meet the Expert Behind Your Turned Components
Aryan Jain Director, Amarex Machining
Frequently Asked Questions
Rotational components such as bushes, sleeves, spacers, shafts, pins, collars, threaded inserts and fasteners, or any part with controlled diameters, bores, threads or grooves, can be reviewed against your drawing.
Brass and copper alloys, aluminum led by 6061-T6, stainless steel, carbon and alloy steel, engineering plastics, Monel 400 and proven Inconel grades are reviewed against the drawing. Brass carries our deepest turning experience.
Specified critical dimensions can be held to +/-0.01 mm (10 microns) where component geometry, material and the selected process allow it. Each tolerance is confirmed during drawing review rather than promised in advance.
Yes, where the drawing and material make a near-net route suitable. Brass hot-forged blanks and sand or shell-moulded blanks are assessed case by case, and the quotation states which route is used.
Depending on the quotation, material test certificates, dimensional inspection reports and third-party test reports from Government-approved NABL laboratories can be supplied.
Yes. Amarex operates an ISO 9001:2015 certified quality management system, supported by calibrated inspection equipment, material traceability and third-party NABL test reports.
Yes. Customer-specified finishing can be supplied, and the quotation sets out the finish specification, the standard it is checked against and the inspection records supplied with it.
Yes. CNC turning and CNC milling are both lead capabilities at our Jamnagar location, so components with turned and milled features are reviewed as one route against the drawing.
Send your drawing for a CNC turning review
Send your released drawing or model, material, critical features, quantity, inspection requirements and the documentation you need. Our engineering team will review the turning route and respond with the project-specific quotation inputs.